FOR BLUETOOTH CONECTIVITY:
Step 1- Go to your System Set up. Click Add device.
Step 2 – Click Bluetooth
Step 3 – Click ID-468T-CF47
Step 4 – Enter PIN : 0000 – Then Click Connect.
Step 5– Click Done
MATCHING COM PORTS FOR USB (INCOMING) AND PRINTER
(OUTGOING)
1.Go to Settings. Under Settings > Bluetooth and devices >
More Bluetooth settings
2.Please check the Outgoing COM number.
（The COM number is not the same, depending on your
computer. Pay attention to the "Direction-Outgoing'' ， Like
below, mine is COM6，you need to remember your comX for
use in step 5）
3.Go back to Bluetooth & devices, click Label Printer (4inch).
4.Click Printer properties.
5.Under Ports, click your outgoing number （mine is COM6 on
the step 2） and click ok.
（Note：if you can not find the COM Port number，Please
restart your computer，and you will find it）
