1. Check that printer is turned on.
2. Long press the Feed Button for 2s and release after 3 beeps to print printer’s info (self-test page).
The following information on the printer's info is printed out. (Some setting values are not displayed depending on the printer settings.)
Field | Field Description | Settings |
Name | Product Name | Label Printer |
Model | Model No. | JD-410WF |
SOFT | Software Version | Firmware version. |
S/N | Serial Number | S/N is the printer's unique product serial number, mainly used for product identification and technical support. |
DHCP | Wired LAN DHCP Status | Default is On. Indicates whether the printer obtains network settings automatically through the Ethernet (LAN) connection. |
IP ADDR | Wired LAN IP Address | 0.0.0.0 is default and invalid. |
SUBNET | Subnet Mask |
|
GATEWAY | Gateway |
|
MAC | Wired LAN Media Access Control Address | The unique identifier of the printer's Ethernet (LAN) interface. |
PORT | LAN Communication Port | The network port used for printing through Wired LAN. |
BT Model | Bluetooth Model Name |
|
BT SOFTVER | Bluetooth Software Version | Shows the software/firmware version of the Bluetooth module. |
BT MAC | Bluetooth MAC Address | The unique identifier of the printer's Bluetooth interface. |
BT NAME | Bluetooth Name | The device name displayed when users search for the printer through APP or Driver. Example: JD-410WF_xxxx |
WIFI MAC | Wi-Fi MAC Address | Indicates whether the printer automatically obtains an IP address from the router through Wi-Fi. |
WIFI VERSION | WiFi Firmware Version | Indicates the firmware/software version of the Wi-Fi module. |
WIFI SSID | Service Set Identifier | Connected Wi-Fi Name. |
WIFI PWD | Wi-Fi Password | Connected Wi-Fi Password. |
WIFI DHCP | Wi-Fi DHCP Status | Default is On. Indicates whether the printer obtains network settings automatically through the Wi-Fi connection. |
WIFI IP | Wireless LAN IP Address | 0.0.0.0 is default and invalid. |
WIFI RSSI | Received Signal Strength Indicator | Shows the WiFi signal strength between the printer and router. If the RSSl is lower than -75 dBm, please move the printer closer to the router or reduce wireless interference. |
WIFI PORT | WiFi Communication Port |
|
Wi-Fi Sharing QR Code |
| Share Wi-Fi QR Code! Simply scan this QR code using your APP [Jadens Printer] to quickly connect to the printer. |